• Home
  • Type 2873 Direct-Acting 2-Way Standard Solenoid Control Valve

Type 2873 Direct-Acting 2-Way Standard Solenoid Control Valve

  • Solenoid Control Valve
  • Direct-Acting
  • Brass Body
  • FKM Seal
  • Port Size: G 1/4"
  • Orifice Size: 2 to 4mm
  • 24V DC
From £154.00
SKU: BB2873 Availability: Available
In stock
SKU BB2873

Burkert Type 2873 Direct-Acting 2-Way Standard Solenoid Control Valve

The direct-acting solenoid control valve Type 2873 is used as the regulating unit in control loops. Due to an elastomeric seat seal the valve closes tight (integrated shut-off function), up to the DN specific nominal pressure.

The plunger of the valve is assembled frictionless, which leads to an extraordinary adjustment characteristic. This valve is particularly suitable for demanding control tasks (high control range, dry gases, etc.).

Key features:

  • Excellent range
  • Very good response
  • Compact valve design
  • Direct-acting
  • Brass body
  • FKM seal
  • Port size: G 1/4"
  • Orifice sizes 2 to 4 mm
  • 24V DC
Explosion Protected Coil available on request. Orifice sizes: 0.8 to 1.5mm available on request.

Datasheet:

Burkert Type 2873 Direct-Acting 2-Way Standard Solenoid Control Valve Datasheet

More Information
Process / Industry N/A
Body Material Brass
Design 2 Way
Port Size 1/4", G1/4
Manufacturer Burkert

The following downloads are available for the Burkert Type 2873 Direct-Acting 2-Way Standard Solenoid Control Valve:

Burkert Type 2873 Direct-Acting 2-Way Standard Solenoid Control Valve Datasheet

Valve Sizing | Flow Rate (Kv)

Please check your required flow rate using the table below, prior to ordering your solenoid control valve. Kvs valve: Flow rate value for water, measured at 20°C & 1 bar pressure differential over a fully opened valve.

Orifice (mm) Kvs valve (m3/h) Nominal Pressure (bar) Max. Differential Pressure (Bar)
2.0 0.100 8 4
2.5 0.150 5 2.5
3.0 0.220 3.5 1.75
4.0 0.320 2 1

No Related Posts